From time to time we all wonder what happened to those instructions! We've all been there, you bought something, haven't used it for a while and then when you want use it and can't quite remember where you put the all important instructions!
If you're getting your water feature out after storing it for the winter or it's new and you've simply misplaced the instructions in the excitement of unpacking, don't worry we're here to help!
The process of setting up your water feature is very simply, just follow the steps below...
- Tighten any visible screws.
- Place the water feature on a level surface.
- If you have a plastic sump (reservoir), we recommend digging a hole to bury the sump or you can decorate around to hide the plastic.
- Connect the hose from the water feature to the pump.
- Fill the water feature with water, ensuring that the pump is fully submerged.
- If solar powered, place the solar panel in the best position to get the best sunlight and refer to the specific solar panel instructions (our solar powered pump instructions can be found HERE).
- Finally, connect to the mains power supply ensuring that the plug is in a suitable weatherproof outdoor socket if not indoors (does not apply if solar powered).
These instruction should be everything that you need to get your water feature running ready for Summer, but if you have any issues then do not hesitate to call our Customer Service Desk on 01733 688464.